BuzzStop
Browser-based setup · ~5 minutes

Set up your BuzzStop device.

Real-time bus arrivals and gentle alerts — so you never sprint for a bus again.

Before you begin

Have these three things ready and you're good to go.

  • BuzzStop device
    Powered on and ready to connect
  • USB-C cable
    The one in the box
  • Wi-Fi network name & password
    The 2.4 GHz network you'll be using

Step 1: Connect Your Device

BuzzStop needs to be connected to your computer to configure it.

  1. 1. Connect BuzzStop to your computer using the provided USB cable.
  2. 2. Click on the "Connect Device" button below.
  3. 3. Select "USB JTAG/Serial debug unit" from the dropdown.
Not connected
Connection Troubleshooting

If connection fails, try these steps:

  • Make sure you are using the provided USB cable
  • Try unplugging and reconnecting the USB cable
  • Try using a different USB port
  • Make sure you're using Chrome, Edge, or Opera browser

Step 2: Wi-Fi Configuration

BuzzStop needs Wi-Fi to fetch real-time bus arrival data. Configure your network settings below.

Step 3: Time Settings

BuzzStop displays the time on its screen. Choose your time settings.

Step 4: Bus Stop Selection

Choose one bus stop that BuzzStop will display live arrivals for. Click on a bus stop from the list to select it.

Ready to search

Enter a postal code or use your current location to find nearby bus stops.

How long does it take for you to get to your bus stop?

Step 5: Configure Smart Alerts

BuzzStop can buzz when a specific bus is approaching. Set alerts for your regular routes.

No bus stop selected

Finish Step 4 first to pick a bus stop — you'll be able to set alerts here after that.

Setup Complete!

Your BuzzStop device has been successfully configured.

You can now disconnect your device and it will start displaying bus arrival information.

Device Serial Logs

Real-time device communication

Device logs will appear here

Connect your device to see communication.

Press Enter to send. Commands go directly to the device.